
High-Pressure Hydro Drain Jetting Services
Heavy grease, fatbergs, or thick scale slowing down your drains? High-pressure hydro jetting blasts water through your pipes to strip walls clean and wash stubborn blockages away. Call 0800 088 4258 for fast local dispatch with zero callout fees.
- Van-mounted hydro jetting rigs blasting up to 3,000 PSI
- Clears fatbergs, heavy grease, hard scale, and silt
- Zero callout fees and upfront fixed pricing
- Ideal for domestic sewer lines and commercial kitchens
⚡ Need urgent response? Calling connects you straight to an on-duty engineer.
Step 1: Choose Your Service
Primary Focus:High-pressure jetting is the best choice when your main underground drain is choked with thick grease, fatbergs, silt, or hard limescale that rods cannot shift.
Alternative Services:If a camera check reveals your drain is collapsed or squashed flat, jetting alone cannot rebuild the pipe. In that case, we recommend our No-Dig Relining or Drain Repair service.
Deep Hydro Jetting for Clean, Free-Flowing Drains
Standard drain rods can punch a small hole through a blockage, but they leave grease, fat, and scale sticking to the pipe walls. High-pressure hydro jetting cleans the entire inner wall of your pipe.
Our van-mounted jetting units pump water at high pressure through a flexible hose with rear-facing nozzles. The water jets pull the hose deep into your drain while scrubbing fatbergs, silt, and heavy scale loose.
We inspect your pipe material before jetting to ensure safe pressure levels. We give you a fixed quote upfront with no hidden callout charges.

Engineering Diagnostic & Process Diagram
Verified UK standards diagram illustrating pipeline mechanics and technical execution.
When You Need High-Pressure Hydro Jetting
Hydro jetting provides deep cleansing when ordinary rodding is not enough.
Fats, oils, and grease from cooking set hard inside pipes, narrowing the drain until wastewater backs up.
Heavy rainfall washes soil, sand, and leaves into outdoor gullies, building up thick silt beds.
Mineral deposits crust over old clay or cast iron pipe walls, catching toilet paper and slowing flow.
Pipes scheduled for resin relining must be hydro-jetted clean so the new structural liner bonds tightly.
Drains that block every few months need hydro jetting to strip away the buildup that catches passing waste.
Standing sewage or mud must be hydro-jetted clear so our camera lens can inspect the pipe walls.
Professional Hydro Jetting Equipment
Commercial van-mounted rigs for fast, thorough pipe restoration.
Heavy-duty pumps delivering up to 3,000 PSI at controlled flow rates for domestic and commercial drains.
Rotary spinning nozzles designed specifically to cut grease, descaling heads, and silt bomb nozzles.
Low-friction hoses that travel smoothly through multiple 90-degree pipe bends without damaging joints.
- Hydro jetting cleans pipe walls; it cannot fix collapsed, crushed, or physically broken underground pipes.
- Water pressure is carefully regulated on fragile 1960s pitch fibre or fractured clay pipes to prevent damage.
- Jetting clears existing buildup, but flushing wet wipes or pouring cooking grease down sinks will cause new clogs.
Our engineering methods, no-dig lining specifications, and off-mains waste operations comply with statutory UK drainage codes and environmental guidelines:
Private Drains and Public Sewerage Guidelines
Published by: Wessex Water & Southern Water
View Statutory Standard Source↗UK Building Regulations Approved Document H — Drainage and Waste Disposal
Published by: HM Government Ministry of Housing, Communities & Local Government
View Statutory Standard Source↗
How Our Hydro Jetting Works in 3 Simple Steps
Fast, safe, and effective pipe cleaning with zero mess left behind.
Access & Safety Inspection
We locate your outdoor manhole hatch and check pipe material to select safe jetting pressure.
Hydro Jetting Run
We feed the jetting nozzle down the line. Water streams scour pipe walls and flush debris out.
Flow Verification
We run water through your appliances to test full flow and confirm your line is 100% clear.
Fast Hydro Jetting Across Dorset, Hampshire & Berkshire
Engineers stationed near Bournemouth, Poole, Wimborne, Southampton, Portsmouth, Winchester, and Reading.
Dorset Council & BCP Council (BH, DT)
Hampshire County Council (SO, PO, RG, GU)
BCP Council (BH1, BH2, BH3, BH4, BH5, BH6, BH7, BH8, BH9, BH10, BH11)
BCP Council (BH12, BH13, BH14, BH15, BH16, BH17)
Southampton City Council (SO14, SO15, SO16, SO17, SO18, SO19)
Portsmouth City Council (PO1, PO2, PO3, PO4, PO5, PO6)
Winchester City Council (SO21, SO22, SO23)
BCP Council (BH23)
New Forest District Council & Hampshire County Council (BH24)
Dorset Council (BH21)

How We Help You Get Your Drain Fixed
Follow our simple, transparent 4-step enquiry process to request assistance.
Tell Us Your Problem
Tell us what is happening with your blocked drain, toilet, or pipe.
Pick Your Location
Select Bournemouth, Poole, Wimborne, Southampton, Portsmouth, Winchester, Christchurch, or Ringwood.
Get a Fixed Price
Get a clear, honest fixed price quote before we start with no callout fee.
Local Engineer Arrives
Our local engineer arrives with high-pressure jetters and camera gear.
Frequently Asked Questions About Hydro Drain Jetting
Clear, factual answers regarding drain jetting across Dorset & Hampshire.

Need High-Pressure Drain Jetting Right Now?
Call our 24/7 phone line on 0800 088 4258 for fast local hydro jetting with zero callout fees.


